• VICTRON 12V 15A IP65 SMART BATTERY CHARGER - BLUETOOTH CONTROL

Victron Blue Smart IP65 SLA/LiFePO4 Charger 12V 15A + Alligator Clips

The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

DescriptionBlue Smart IP65 SLA/LiFePO4 Charger 12V 15A + Alligator Clips & M8 Eyelets
Width105mm
Height60mm
Length/Breadth/Depth190mm
Weight900g
BrandVictron Energy

i.
Blue Smart Charger IP65 The professional’s choice

* Water, dust and chemical resistant
* Seven step smart charge algorithm
* Recovery of fully discharged ‘dead’ batteries
* Automatic power supply function
* Severe cold performance: down to -30°C
* Several other battery life enhancing features
* Low power mode to charge smaller batteries
* Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart

Ultra high efficiency "green" battery charger
With up to 50% efficiency, these chargers generate up to 4 times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0.5Watt, some five to ten times better than industry standard.
 
Durable, Safe & Silent
Low thermal stress on the electronic components
Protection against ingress of dust, water & chemicals
Protection against overheating: the output current will reduce as temperature increases up  to 60°C, but the charger will not fail.
The charger are totally silent: no cooling fan or any other moving parts.
 
Reconditioning
A Lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. if caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.
 
Recovery function for fully discharged batteries
Most reverse polarity protected chargers will not recognize & therefore not recharge a battery which has been discharged to Zero volts. The Blue Smart Charger however will attempt to recharge a fully discharged battery with low current & resume normal charging once sufficient voltage has developed across the battery terminals.
 
The VictronConnect app
Setup, readout & configure your Blue Smart IP65 Charger via your smartphone.
 
You can display the status of your charger & battery & even control the functions of your charger using the VictronConnect app. On your screen the readout of the voltage & current is default available.
 
Download your app for IOS & Android at
https//www.victronenergy.com/liive/victronconnect
 
Storage mode: less corrosion of the positive plates
Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
 
Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase & compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage.
Special settings for a cold or hot environment are therefore not needed.
 
Li-ion Battery Mode
The Blue Smart Charger uses specific charging algorithm for Li-ion (LIFePO4) batteries with automatic Li-ion under voltage protection reset.

VICTRON 12V 15A IP65 SMART BATTERY CHARGER - BLUETOOTH CONTROL

  • Brand: Victron
  • Product Code: VE-BPC-SMART-IP65-12/15+DC
  • Availability: In Stock
  • $210.00


Tags: VICTRON 12V 15A IP65 SMART BATTERY CHARGER - BLUETOOTH CONTROL